A new platform

ok, I have had an X25 deck stand for years now, and it is actually quite good. Its stable and well put together, and of course, holds enough of the basic equipment to keep you up and running. Of course, as I expand my setup, I have come to basic realisation that what I need, is actually a simple flat surface. So me, being me, I opened up visio and knocked this up:

….essentially  it is 2 sheets of 8ft x 4ft, 3/4″ mdf cut into a number of shapes and sizes, screwed togetehr resulting in two vertical podiums, each wide enough to take a 19″ rack mount perfectley, and a worksurface 2meters by 750mm, big enough for plenty of equipment. the whole thing stands 600mm high, which is the same height as your kitchen sink! so its ideal to stan infront of for long periods of time. If anyone is interested I’ll post up the 2 x cutting guides for the mdf sheets so that you can make your own. To put it into perspective. you can buy somthing similar, but inferior at www.htfr.com for well in excess of £130. The total cost for my version, which is bigger and better, is £30, yes 2 x sheets of mdf from B&Q at £15 per sheet. for the sake of an afternoons work, i know which one i would do!

Leave a Reply

Your email address will not be published. Required fields are marked *